Digital camera to a standard trinocular microscope head equipped with a third eyepiece port. The 2 piece adapters may be purchased separately or as equipment splits - 25-70-14-01 (23mm eyepiece mounting diameter) or 25-70-14-02 (30mm eyepiece mounting diameter). The thread converters are purchased separately as required from www.dcprodirect.com.

23mm:
The stabilizing clamp (where applicable) is slipped over the phototube (this only works if the outside diameter of the phototube does not exceed 26mm. If it does, omit the clamp). Thread converters are added to the digital camera as required. The digital coupler is attached to the camera and then inserted into the stabilizing clamp (where applicable). Both clamp screws are tightened to prevent vibration in the system.

30mm:
Thread converters are added to the digital camera as required. The digital coupler is attached to the camera and then inserted in the 30mm eyepiece adapter which is, in turn, inserted in the trinocular port.